Marine Airbag
-
High Pressure Ship Airbags Upper Discharge Launching Air Bag
Marine airbag introduction:
1. The Marine rubber airbag has become a popular choice for many first-time users, despite the challenge of picking the right Marine launch airbags. However, users can easily consult with the air bag factory to provide necessary information such as ship length, width, dead weight tonnage, and slipway slope. Using these details, the factory is able to design the most cost-effective and efficient Marine airbag for the user’s specific needs.
2. To make launching a ship easier, the lifting airbag maximizes the high bearing capacity of the Marine airbag to lift the ship from the slipway. With enough space between the slipway and the ship, the launching airbag can be placed conveniently for a smooth launch. Since production requirements for the lifting airbag are strict, it is essential to follow the overall winding process and ensure a thickness of 10 layers.
3. In the integral winding process, it is crucial to use a single integral glue cord from the beginning to the end of the hanging cord. Furthermore, it is important to avoid lap or stitching procedures while winding each layer at an angle of 45 degrees to form the crucial cross-wound pattern.
-
Rubber Airbag High Strength Safe and Reliable
Marine airbag preparation before use
1. Clear and clean the sharp objects such as iron on the berth to avoid scratching the Marine airbag and causing unnecessary losses.
2. Place the Marine airbags at the bottom of the ship at a predetermined distance and inflate it. Obact the rising state of the ship and the pressure of the air bag at any time.
3. After inflating all Marine airbags, check the state of the air bags again, check whether the ship is balanced, and check whether the berth is clean and tidy.
4. The most important thing for the ship to use the air bag to launch is the stern first, and the stern first introduces the water surface; If it had gone the other way, the propeller at the back of the boat would have scraped the air bag, causing a safety accident.
-
Large Marine Rubber Airbag Use Mission Long
Advantages of Marine airbags
1. The construction of the Save a lot of money Using ship airbags on the way, the water launching is a promising new technology, changing the repaired the ship can only adopt slipway, floating dock, the dock water way, thereby saving the chute, dock, the dock into the constructed a lot of money, and thus reduce the upfront costs of the construction yard.
2. Greatly improve the ability of shipyard built Because the traditional way of fluctuation restricted the shipyard’s production capacity, use of Marine airbags flexible fluctuation radically changed only use slipway, dock in the work of the traditional way of the ground can be used in the work of then use airbag launching way, so that it can greatly improve the repaired the ability of shipyard.
-
High Strength Boat Lift Airbags Special for Ship Maintenance
Main business of the company
Company’s long-term commitment to Boat Lift Airbags, Marine salvage airbags, yokohama pneumatic fender, Marine pneumatic fender, inflatable rubber fender, pneumatic rubber fender, yokohama fender, research and development, production and sales of the pneumatic fender in yokohama, using natural rubber and styrene butadiene rubber, polybutadience rubber, such as synthetic rubber, rubber hard, more abrasion resistance and toughness, product use high quality materials and special explosion-proof technology, sightseeing along the outside, good wear resistance, aging resistance, air tightness, high intensity, long service life, high quality, and through the ISO17357 and ISO9001: 2008 international quality management system certification and CCS, ABS, BV, DNV, GL, LR and other product quality certification, and for the national large construction enterprises and wharf protection to provide products and services.
Pneumatic rubber fender is also called Yokohaine fender, inflatable rubber fender, Marine pneumatic fender and Marine fender.
-
High Strength Ship Launching Airbags Factory
Marine airbag introduction:
1. Some users use the Marine rubber airbag for the first time;For Marine launch airbags selection is not very professional, in this case, the user contact the air bag factory and provide the ship length, width, dead weight tonnage, slipway slope and other information, the factory will design the most cost-effective Marine air bag for the user to use according to these data.
2. Lifting airbag is to use the high bearing capacity of Marine airbag to jack up the ship from the slipway, so that there is a large space between the ship and the slipway, convenient for placing launching airbag, so that the ship launches smoothly. The production requirements of lifting air bag are very strict, and the overall winding process must be adopted, and the thickness should generally reach 10 layers.
3. The integral winding process refers to the use of a single integral glue cord from the beginning to the end of the hanging cord, and no lap or stitching process is allowed; Each layer should be wound to form a cross wound with an Angle of 45 degrees.
-
New Integral Winding Technology for Ship Airbag
Ship Airbag application field:
1. The ship building industry and the ship repair industry are mainly to launch the ship safely in the ship building industry, and to shore the ship safely for repair in the ship repair industry.
2. It is used in the construction industry to carry super large building structures. Such as the weight of more than 10,000 tons of piers, wharf caisson and other large reinforced concrete structures on the slope of displacement, salvage sunken ships, stranded rescue and so on.
Compared with the traditional skateboard and slide craft, it has the characteristics of labor-saving, time-saving, labor-saving, less investment, flexible mobility, safety and reliability. It is suitable for all types of ships and construction.
Ship launching air bag is divided into: Low pressure Airbag, medium pressure Airbag, high pressure Aairbag.
-
Wear-Resistant and Explosion-Proof Marine Airbag
Marine air bag, ship airbag, launching airbag advantages:
1. The construction of the Save a lot of money Using ship airbags on the way, the water launching is a promising new technology, changing the repaired the ship can only adopt slipway, floating dock, the dock water way, thereby saving the chute, dock, the dock into the constructed a lot of money, and thus reduce the upfront costs of the construction yard.
2. Greatly improve the ability of shipyard built Because the traditional way of fluctuation restricted the shipyard’s production capacity, use of Marine airbags flexible fluctuation radically changed only use slipway, dock in the work of the traditional way of the ground can be used in the work of then use airbag launching way, so that it can greatly improve the repaired the ability of shipyard.
-
Marine Airbags High Strength Safe and Reliable
Main business of the company Company’s long-term commitment to Boat Lift Airbags, Marine salvage airbags, yokohama pneumatic fender, Marine pneumatic fender, inflatable rubber fender, pneumatic rubber fender, yokohama fender, research and development, production and sales of the pneumatic fender in yokohama, using natural rubber and styrene butadiene rubber, polybutadience rubber, such as synthetic rubber, rubber hard, more abrasion resistance and toughness, product use high quality mat...
